Connections; Specification - ROBBE POWER PEAK Infinity 3 Manual De Uso

2.1 CONNECTIONS

3. SPECIFICATION

Operating voltage:
Cell count:
Discharge current:
Final discharge voltage:
Trickle charge:
Charge termination:
NC / NiMH batteries:
Cut-off sensitivity:
Lead-acid batteries:
Temperature cut-off:
Capacity monitoring:
Output 'OUT 2':
Charge current:
Dimensions:
Operating Instructions
POWER PEAK Infinity 3
11 V ... 15 V DC, (12 V lead-acid battery, or a high-
performance mains PSU; do not use a car battery charger!
1 ... 30 NC / NiMH cells
1 ... 12 Lithium-Polymer cells,
1 ... 6 and 12 Lead-acid cells Charge current:
0.1 ... 10 A (max. 180 Watts)
0.1 ... 5 A (max. 50 Watts)
0.1 ... 1.1 V per cell (NC / NiMH batteries)
2.5 ... 3.7 V per cell (LiPo batteries)
1.8 V per cell (Lead-acid batteries)
0 ... 500 mA, variable in 50 mA increments for NC / NiMH
batteries, C/20 with BID chip
Automatic, digital Delta-Peak system
5 ... 25 mV per cell, NC batteries
3 ... 15 mV per cell, NiMH batteries or ZERO peakLiPo /
Automatic, using CC-CV process
10 ... 65°C, variable in 1°C increments
10 ... 150%, variable in 10% increments (NC / NiMH batteries)
10 ... 120%, variable in 10% increments (LiPo / Lead-acid batteries)
Charging of 1 - 8 NiCd / NiMH cells (automatic cell count detection)
0.1 - 2.0 A in 0.1 A increments, optionally manual or automatic, with
Delta-Peak cut-off
155 x 143 x 56 mmWeight:
6
Wiring diagram of a LiPo battery
connected to the Infinity 3, with TOP
Equalizer, BID chip and temperature
sensor.
ca. 580 g
No.
8429