Marmitek DOORPHONE 150 Modo De Empleo página 17

and the call indicator
in standby mode.
6. Once the call is answered, the Call indicator
steady and the ding-dong tone will stop ringing. Conversation
can now be conducted by speaking into the Microphone
7. Upon receiving a call, either icon A
on the screen, depending if the call is from the front gate or back
gate (in case you have purchased an optional Door Unit for back
gate). The handset can answer the call by pressing the Answer
button
LCD.
Now conversation is possible and the voice of the visitor can be
heard from the speaker
hold the PTT button
the reception mode icon D
after finish speaking to listen to the visitor, the reception
14
mode icon D
voice of the visitor will not be heard while pressing the PTT
button . Upon finishing the conversation, press the Hang up
14
button
This system has an automatic end call feature. In case the resident
does not talk back to the visitor (i.e. press the PTT button
more than 90 sec, the call will be ended automatically. This
feature is useful for protecting your privacy in case you forget to
end the call by pressing the Hang up button
8. Once a call has been answered, you can use the Door lock open
button
visitor (this function is only available if there is a 12V DC supply to
the Door Unit and your door is equipped with an electric latch).
Press the button
will appear on the screen, showing that the door latch is
open. The icon M
Under standby mode (i.e. when no call is set up between the
handset and Door Unit), the electric door latch can also be
opened by a long press of button
indicator
To avoid misuse by children, this door lock opening function can
be activated or deactivated. When deactivated, pressing the
button
Deactivate door lock opening feature
Under normal operating mode, shortly press the button
then within a period of 2 sec, shortly press the button
DoorPhone 150
will flash two times, indicating the unit is
and the reception mode icon D
. To talk back to the visitor, press and
and speak towards the Microphone
14
will show up again. It should be noted that the
to end the call.
to remotely open the electric door latch for the
shortly, wait for 4-5 seconds and the icon M
will disappear after 3 sec.
on the Door Unit also lights up for 2 sec.
will have no effect.
or icon B
will go off. Release the PTT button
for over 2 sec. The Call
will light up
will appear
will show up in
,
15
) for
14
.
,
. The
17