Using The Menu - Dedicated Micros Sprite Lite Guide D’iNstallation

Configuring

Using the menu

Sprite Lite uses a paged menu system to guide the installer through the
installation process.
Note: The menus can only be accessed whilst in Live mode.
Entering the menu
Press and hold the mode key.
Note: A password may be required if one has previously been set.
Navigating the menu
The menus are displayed with options on the left-hand column and settings in the
right-hand column. A cursor (highlighted text) can be moved using the cursor keys on
the front panel, or on the remote keypad.
To change the settings
1. Use the cursors to select the option you wish to change in the left-hand side of
the menu.
2. Use the cursor to highlight the settings.
3. Use the cursors to change the settings.
4. Use the cursor to return to the options.
To view the next page
Press the mode key.
To exit the menu
Press and hold the mode key or cycle through all the menus to exit.
Note: If there is an alarm trigger or a camera fail, the 'Alarm & Camera Status' page is
displayed before the menus, indicating which cameras have an alarm or failed camera.
Press the mode key to display the first menu page.
Example of using the menu to change the time:
Time, Date & Language
Time 12:00
Time
Date 03/01/2001
Date format Day, Month
Language English
1. Press and hold the mode key to display the menu page above.
Time, Date & Language
Time 12:00
Date Date 03/01/2001
Date format Day, Month
Language English
2. Use the cursors to select the date option on the left-hand side of the menu.
Time, Date & Language
Time 12:00
Date 03/01/2001
03
Date format Day, Month
Language English
3. Use the cursor to highlight the date setting.
5