Sending Data To The Pc Processor; Programming Mode - Alcad 905-PC Manual De Instalación Y Programación

22 - ENG
FUNC. SCREEN
!"
Table channels Different tables of channels or frequency
TABLA
B/G CCIR
Transmission Transmit data to the processor.
T
COPY
F READ Read...
READ
DATA
Mode
Output channel
Output frequency 474..862 MHz
Input channel
Input frequency
Output offset
Input offset
Table of
channels
SCREEN
Data error
Reading error An error occurred during the READ function.
5.

SENDING DATA TO THE PC PROCESSOR

5.1

Programming mode

To program the channel processor, place the programming switch in the ON
position (13). From the moment you do so, the programming indicator will
Installation and programming manual
DESCRIPTION
mode.
Read all the data of a processor.
Tab. 2 - Functions
VALUE
Analogue/Digital
-
-
474..862 MHz
-3/6, -2/6, -1/6, 0,
+1/6, +2/6, +3/6 MHz
-3/6, -2/6, -1/6, 0,
+1/6, +2/6, +3/6 MHz
B/G CCIR
I UK SM8
D/K OIRT
L FRANCE
Frequency
Tab. 3 - Range of values
DESCRIPTION
The data selected does not belong to the range of
values indicated in table 3.
Tab. 4 - Warnings
DESCRIPTION
Analogue or digital mode.
Values according to CHANNELS
TABLE.
Output frequency (UHF band).
Values according to CHANNELS
TABLE.
Input frequency (UHF band).
Offset of output frequency.
Offset of input frequency.
UHF channels for different channel,
standards. Programming by channel
or by frequency.