Turbo Function Key; Changing Recirculation - Broan HRVH100SE Guía De Uso

2. C
(
ONTROLS
CONT
2.4 M W
AIN
2.4.2 TURBO F
2.4.3 C
HANGING
NOTE: Prior to perform
this setting, the
wall
must be ON.
Press on MODE
key to change for
RECIRCULATION.
NOTE: To get back to OFF in AUTO and ECO modes (in second part of cycle),
' )
D
C U
ALL ONTROL SE
K
UNCTION EY
When the wall control is ON (no matter the operation mode),
pressing on TURBO key will turn the unit on air exchange in high
speed during 4 hours, then, the unit will get back to its previous
operation mode*.
When activated, the tornado icon is flashing. To exit this function
before the end of its 4-hour cycle, press another time on TURBO
key; the unit will get back to its previous operation mode*.
*Except if it was in ECO mode, for this particular case, the unit
will get back to the mode chosen before ECO mode.
More than
4 sec. When the wall control is ON (no matter the operation mode),
pressing on TURBO key for more than 4 seconds will turn the
unit on air exchange in high speed with no time limit.
When activated, the tornado icon appears on screen. To exit
this function, press another time on TURBO key; the unit will
get back to its previous operation mode*.
*Except if it was in ECO mode, for this particular case, the
unit will get back to the mode chosen before ECO mode.
RECIRCULATION
Press and hold simultaneously
MODE and ECO keys during
control 4 seconds to access setting.
repeat the complete procedure.
( ' )
CONT D
OFF
TO FOR
4 sec.
The word OFF is
flashing (default
configuration setting).
7
AUTO ECO M
AND
Letters rEC and circled
arrows are flashing to show
setting has been changed
to RECIRCULATION.
Press and hold simultaneously
MODE and ECO keys during
4 seconds to save and exit
setting.
4 sec.
ODES