Connecting Other Equipment; Connecting Headphones; Using The Aux Input; Security Cable Connection - Boston Acoustics Horizon Solo Manual Del Propietário

Connecting Other Equipment

Connecting Headphones

Connect the headphone plug to the jack on the front panel. This turns off the Solo internal speaker. If your
headphones have the old-style large plug you will need an adapter.

Using the Aux Input

Other audio equipment, such as an iPod or a portable CD player, can be connected to the Solo through the
rear panel Aux input. You will need a cable with a stereo mini plug on both ends. Select the Aux input using
the control as described in the "Selecting a Source" section on page 6.
MODe

Security Cable Connection

There is a security cable connection point on the rear of the Solo adjacent to the AM antenna connector. This
is the same as the connection point found on most laptop computers. Connect a computer security cable
between the Solo and a solid anchor point to help prevent theft of your Solo.

About Clock Memory

When power to the Solo is interrupted a special power component called a "super-cap" will keep the clock
functions active for a period of 24-48 hours. If the Solo is without power for a longer period of time you may
need to reset the clock when power is restored.
12