Before Printing - Xerox 700 Digital Color Press Manual De Usario

Before printing

T
O SET UP A
Before printing to the Integrated Fiery Color Server, verify the following:
• The FreeFlow IPP enablement file is installed on the Integrated Fiery Color Server.
To verify enablement, print a Configuration page and verify that the Update Information
section includes the file name: 1-13R6ES.
For information about printing a Configuration page, see Configuration and Setup.
For instructions on downloading and installing the FreeFlow enablement file, see
"Installation" on page 3.
• Integrated Fiery Color Server software is installed on the client workstation.
For instructions on installing and using the Integrated Fiery Color Server, see the
documentation that accompanies the server.
• FreeFlow Express to Print, Makeready, Process Manager, Web Services, Print Manager,
or Output Manager, version 8.0 are installed on the FreeFlow system.
Setting the print path
Use the following procedure to set up a FreeFlow application to print to the Integrated Fiery
Color Server.
F F
REE LOW APPLICATION TO PRINT TO THE
1 From the FreeFlow Printer Registration application, select Add.
The Add Printer Wizard dialog box appears.
2 Enter the IP address of the Integrated Fiery Color Server and click Identify Configuration to
automatically detect the Printer Model and Controller/Server Type.
N : If the network cannot automatically detect the digital press and Integrated Fiery Color
OTE
Server, do the following:
• Select Xerox 700 Digital Color Press from the Printer Model list.
• Select Integrated Fiery Color Server 1.5 IPP from the Print Controller/Server Type list.
• Follow the Printer Registration instructions to complete the printer installation.
I F C S
NTEGRATED IERY OLOR
Page 2
ERVER