Check operation
In order to avoid causing damage to the vehicle, it is absolutely necessary to closely
Moreover, the encoding must be carried out according to the precise vehicle type. For this
purpose, the precise details of the vehicle (production date, equipment versions, etc.)
must be called up in ELSA (ELectronic Service Assistant) on the basis of the vehicle
If an SVM code should be entered that does not match the vehicle, this will lead to re-
Non-observance of these instructions can lead to serious damage to the electrics and / or
electro-mechanical components that could cause the vehicle to break-down and stop.
Damage resulting from incorrect encoding cannot be invoiced via the warranty!
15. Coding is done on the ServiceNet or contact the NSC.
16. Then, as in the beginning, perform a system request via the "Guided trouble shooting" and
delete any possible error codes.
17. Check the functions of the trailer using a suitable test device (with load resistances) or with a
trailer attached.
18. Secure all cables with cable ties and re-fit all parts disassembled.
10
ATTENTION!
follow the encoding described in these instructions!
identification number.
coding via the SVM no longer being possible!
321 704 391 103 – 005 – 44/16
VW Amarok