Descargar Imprimir esta página

Mixer Output Section - Mark MM Serie Instrucciones De Usuario

Ocultar thumbs Ver también para MM Serie:

Publicidad

Idiomas disponibles

Idiomas disponibles

C. MIXER OUTPUT SECTION
45. STEREO AUX RETURN 1
The STEREO AUX RETURN 1 connectors generally serve as the return path for the effects mix generated
using the post-fader aux send. This is where you connect the output signal of the external effects device.
If only the left connector is used, the AUX RETURN automatically operates in mono.
46. STEREO AUX RETURN 2
The STEREO AUX RETURN 2 connectors serve as the return path for the effects mix generated using the
FX control. If these connectors already function as additional inputs, you can route the effects signal back
into the console via a different channel, with the added benefit that the channel EQ can be used to adjust
the frequency response of the effects return signal.
47. AUX SEND 1
If you use aux send 1 pre-fader, you would usually connect the AUX SEND 1 connector to monitors via a
power amp (or an active monitor system). If you use aux send 1 post-fader, proceed as described under
aux send 2.
48. AUX SEND 2
The AUX SEND 2 connector outputs the signal you picked up from the individual channels using the FX
control. You can connect this to the input of an effects device in order to process the FX bus signal. Once
an effects mix is created, the processed signal can then be routed from the effects device output back into
the STEREO AUX RETURN connectors.
49. CD / TAPE INPUT JACK
The CD/TAPE INPUT RCA connects are for the connection of CD players, tape decks or other line-level
sources. The signal volume is adjusted with the TO MAIN control.
50. RECORD PIN JACK
The CD/TAPE OUTPUT REC connects provide the stereo main mix signal to a tape deck or DAT recorder
to record your mix. The signal is taken pre-fader, so that will not be influenced by the fader positions.
51. PHONES
You can connect headphones to this 1/4" TRS connector. The signal on the PHONES connection is sourced
from the control room output.
52. FOOTSWITCH
The FOOTSW(ITCH) connector allows you to connect a standard footswitch to separately enable/disable
FX.
MM 804/1204/1604 E USB
45
LEFT
RIGHT
/MONO
1
46
48
2
FX
STEREO AUX RETURNS
AUX SENDS
MONO
L
BAL
OR
UNBAL
R
LEVEL
+ 4
—10
LINE IN 9/10
LINE IN 11/12
9
47
49
50
INPUT
OUTPUT
1
CD/TAPE
L
L
2
R
R
MONO
52
L
BAL
OR
FX
UNBAL
FOOTSW
R
LEVEL
+ 4
—10
PHONES
51
User manual/Manual de Uso
ENGLISH

Publicidad

loading

Este manual también es adecuado para:

Mm 804 e usbMm 1204 e usbMm 1604 e usb