Preparing The Hard Disk Using Windows 7/8; Otb Software; Installing The Otb Software; Using The Otb Software - Eminent ewent EW7015 Manual Del Usuario

4.2 Preparing the hard disk using Windows 7/8

1. Go to 'Start'.
2. Select 'Control Panel'.
3. Select 'Administrative Tools'.
4. Select 'Computer Management'.
5. Select 'Disk Management' at 'Storage'.
6. Right-click the new hard disk and click 'New Simple Volume'.
7. Choose the amount of free space needed for the new disk/partition. We
recommend to use all of the free disk space.
8. Select the drive letter you wish to assign.
9. Enter a name for the new partition.
10. Format the hard disk.
11. After formatting, the hard disk is ready to be used.
Note: Formatting the hard disk can take a few minutes, depending on the hard disk
size. Do not interrupt this process.

5.0 OTB software

5.1 Installing the OTB software

1. Start your computer.
2. Place the installation disk in your CD-rom or DVD-player.
3. The installation disk will start automatically .
4. Choose your language.
5. Choose Install EW7015.
6. Follow the instructions on screen to continue.
Note! When installing this software on Windows Vista or 7/8, you will be prompted to
give permission to continue the installation.

5.2 Using the OTB software

There are two methods to make a backup with the EW7015. You can use the PC
Clone EX software to make a backup, or you can use the 'Backup button' of the
EW7015 itself. In the following examples we will explain how you can use these two
methods.
5 |
ENGLISH