Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Maintenance
Lubrication
• Pneumatic tools require constant lubrication through the
entire service life and when operating.
• Compressed air used for the tool contains humidity. It
can rust the tool mechanism.
• To prevent this possibility, apply constantly lubricating oil
using the
Centralized Filter-Oil Feeder System install between the air
compressor and the tool.
• Oil in excess is immediately ejected
WARNING
through the air flushing. Always keep the air flush free of
obstructions. Never point it towards people or objects.
• When not using the tool for long periods of time,
thoroughly careful lubrication is needed.
• After each 60-hours operation, the tool mechanism need
to be lightly greased. Grease in excess may lower the tool
power.
Brand UNI-LL-1/4
Service
• Service the tools every 3 months only in a
Authorized Service Center. Service
and maintenance carried out by non-certified personnel
may result dangerous and can cause personal injury and
makes the product Warranty void.
• Tool malfunctioning due to failure to use the dose
lubrication recommended, not following the instructions in
this manual or repairs carried out by personnel not
certified by
Warranty. We reserve the right to make technical
improvements with no previous notice.
, is not covered in the
9
ENGLISH
Publicidad
Capítulos
Tabla de contenido
