Installation And Setup; Setting Up The Player; Dvd Player Connections; Video And Audio Connections To Your Tv - LG DV162 Manual Del Usuario

Installation and Setup

Setting up the Player

The picture and sound of a nearby TV, VCR, or radio
may be distorted during playback. If this occurs,
position the player away from the TV, VCR, or radio,
or turn off the unit after removing the disc.

DVD Player Connections

Depending on your TV and other equipment there are
various ways you can connect the player. Please refer
to the manuals of your TV, stereo system or other
devices as necessary for additional connection
information.
Caution:
You must set the TV Output Select option on the
setup menu to use COMPONENT VIDEO
OUT/PROGRESSIVE SCAN jack or S-Video jack.
(Refer to page 11.)
8
Video and Audio Connections
to Your TV
Make sure the unit is connected directly to the TV and
not to a VCR, otherwise the DVD image could be
distorted by the copy protection system.
Video – Connect the VIDEO OUT jack on the unit
to the video in jack on the TV using the video
cable (V).
S-Video: Connect the S-VIDEO OUT jack on the
DVD Player to the S-Video in jack on the TV using
the S-Video cable (S).
Audio – Connect the left and right AUDIO OUT
jacks of the unit to the audio left and right IN jacks
on the TV (A) using the audio cables. Do not
connect the unit's AUDIO OUT jack to the phone
in jack (record deck) of your audio system.
Component Video – Connect the COMPONENT
VIDEO OUT/PROGRESSIVE SCAN jacks on the
unit to the corresponding in jacks on the TV using
an Y Pb Pr cable (C).
Progressive Scan
• If your television is a high-definition or "digital
ready" television, you may take advantage of
the DVD player's progressive scan output for
the highest video resolution possible.
• Set the Progressive Scan to "On" on the setup
menu for progressive scan signal.
(Refer to page 11)
• Progressive scan does not work with the
analog video connections (yellow VIDEO OUT
jack).