Control Panel; Temperature Regulation; Switching Off; Frostmatic Function - AEG ABE812E6NC Manual De Instrucciones

4. CONTROL PANEL

Display
1
Temperature warmer button
2
Temperature colder button
3
OK
4
It is possible to change predefined
sound of buttons by pressing together
4.1 Display
A
4.2 Switching on
1. Connect the mains plug to the power
socket.
2. Press the appliance ON/OFF if the
display is off. The temperature
indicators show the set default
temperature.
To select a different set temperature
refer to "Temperature regulation".
If "dEMo" appears on the display, refer
to "Troubleshooting" .

4.3 Switching off

1. Press the appliance ON/OFF for 3
seconds.
The display switches off.
2. Disconnect the mains plug from the
power socket.
6
B C
F E D
1
5 4 3
Mode
5
ON/OFF
6
Mode and temperature colder button for
a few seconds. Change is reversible.
A. Timer indicator
B. Frostmatic function
C. Temperature indicator
D. Alarm indicator
E. ChildLock function
F. DrinksChill function

4.4 Temperature regulation

Set the temperature of the appliance by
pressing the temperature regulators.
Default recommended set temperature
is:
• -18°C for the freezer
The temperature range may vary
between -15°C and -24°C for freezer.
The temperature indicators show the set
temperature.
The set temperature will be
reached within 24 hours.
After a power failure the set
temperature remains stored.

4.5 Frostmatic function

The Frostmatic is used to perform pre-
freezing and fast freezing in sequence of
Freezer compartment. This function
ENGLISH
2
9