Care And Maintenance - Hammerhead HDHD060 Manual Del Usuario

CARE AND MAINTENANCE

All maintenance should only be carried out by an authorized service organization.
Cleaning
Before cleaning or performing any maintenance, unplug the hammer drill from the power
source. For safe and proper operation, always keep the
Always use only a soft, dry cloth to clean your hammer drill; never use detergent or alcohol.
Removing The Chuck
a. Unplug the hammer drill from the
power source.
b. Open the chuck jaws by turning
the sleeve in a counter-clockwise
direction.
c. Use a Phillips screwdriver (not
included) to remove the chuck
screw by turning it in a clockwise
direction.
d. Insert a 5/16 in. or larger hex key
(not included) into the chuck and
securely tighten the chuck jaws
around the hex key.
e. Tap the hex key sharply with a mallet (not included) in a counter-clockwise direction.
This will loosen the chuck for easy removal.
NOTICE: The chuck screw has left-handed threads.
f. Attach a new chuck to the spindle and tighten the chuck screw.
6.0 AMP HAMMER DRILL
tool and its ventilation slots clean.
MALLET
HEX
WRENCH
CHUCK
JAWS
17