Operating Instructions; Variable- Speed Trigger Switch - Hammerhead HDHD060 Manual Del Usuario

OPERATING INSTRUCTIONS

1. Variable-Speed Trigger Switch
a. Connect the power cord of your
hammer drill to a standard
household power outlet.
b. To turn the hammer drill ON, press
the trigger switch.
c. To turn the hammer drill OFF,
release the trigger switch.
NOTICE: The variable-speed trigger
switch delivers higher speed with
increased trigger pressure and lower
speed with decreased trigger pressure.
2. Lock-On Button
This hammer drill is equipped with a
lock-on button, which is convenient
for continuous drilling for extended
periods of time.
a. To drill continuously, press and
hold the trigger switch and then
press the lock-on button. Release
the trigger switch.
b. To unlock the lock-on button and
stop continuous drilling, press the
trigger switch and the lock-on
button will release automatically.
6.0 AMP HAMMER DRILL
1
VARIABLE-
SPEED TRIGGER
SWITCH
2
LOCK-ON
BUTTON
9