Descargar Imprimir esta página

Safety In The Workplace; Personal Safety - MSW -FMP-01 Manual De Instrucciones

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 8
j)
Schließen Sie in Bereichen, wo die Gefahr einer
mechanischen
Beschädigung
hoch
ist,
einen
verstärkten Schlauch an die Druckluftanschlüsse.
k)
Stellen Sie vor jedem Gebrauch sicher, dass
das Aufsatzstück korrekt im Gerät verbaut und
der
Schlauch
ordnungsgemäß
gesichert
unbeschädigt ist.
l)
Das Gerät darf nicht an der Druckleitung getragen
oder aufgehängt werden.
m)
Berühren
Sie
keine
beweglichen
Teile
oder
Zubehörteile, es sei denn, das Gerät wurde von der
Druckluftversorgung getrennt.
n)
Wenn Sie ein Leck am Gerät oder an den Schläuchen
bemerken, trennen Sie sofort die Druckluftversorgung
und beheben Sie die Mängel.
o)
Der
empfohlene
Versorgungsdruck
darf
nicht
überschritten werden, da dies das Gerät beschädigen
kann.
p)
Das Gerät ist kein Spielzeug. Reinigung und Wartung
dürfen nicht von Kindern ohne Aufsicht durch eine
erwachsene Person durchgeführt werden..
q)
Es ist untersagt, in den Aufbau des Geräts einzugreifen,
um seine Parameter oder Konstruktion zu ändern.
r)
Geräte von Feuer – und Wärmequellen fernhalten.
s)
Überlasten Sie das Gerät nicht.
t)
Wenn das Gerät längere Zeit nicht benutzt wird, wird
empfohlen, den Kolben zu schmieren, um das Gerät
zu schützen.
ACHTUNG! Obwohl das Gerät mit dem Gedanken
an
die
Sicherheit
entworfen
wurde,
besitzt
es bestimmte Schutzmechanismen. Trotz der
Verwendung
zusätzlicher
Sicherheitselemente
besteht bei der Bedienung immer noch ein
Verletzungsrisiko. Es wird empfohlen, bei der
Nutzung Vorsicht und Vernunft walten zu lassen.
4
und
Rev. 03.04.2020
U S E R M A N U A L
LEGEND
The product satisfies the relevant safety
standards.
Read instructions before use.
WARNING! or CAUTION! or REMEMBER!
Applicable to the given situation (general
warning sign).
Only use indoors.
ATTENTION! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury or even death.
The terms "device" or "product" are used in the warnings
and instructions to refer to PNEUMATIC FILLING MACHINE.
Do not put your hands or other items inside the device
while it is in use! Do not exceed the maximum permissible
operating pressure!

SAFETY IN THE WORKPLACE

a)
Make sure the workplace is clean and well lit. A messy
or poorly lit workplace may lead to accidents. Try
to think ahead, observe what is going on and use
common sense when working with the device.
b)
If you discover damage or irregular operation,
immediately switch the device off and report it to
a supervisor without delay.
c)
If there are any doubts as to the correct operation
of the device, contact the manufacturer's support
service.
d)
Only the manufacturer's service point may repair the
device. Do not attempt any repairs independently!
e)
Children or unauthorised persons are forbidden to
enter a work station. (A distraction may result in loss
of control over the device).
f)
Only connect and disconnect the pressure line when
the air valve is closed.
g)
Do not point the pressure line towards yourself or
toward other people or animals.
h)
Do not cut off the supply of compressed air by
crushing or bending pressure hoses.
i)
When starting the device, increase the air supply
to the device gradually in order to ensure that it is
functioning properly. If you notice any abnormal
operation of the device, disconnect it immediately
from
the
compressed
air
and
contact
manufacturer's service point.
j)
Please keep this manual available for future reference.
If this device is passed on to a third party, the manual
must be passed on with it.
k)
Keep packaging elements and small assembly parts in
a place not available to children.
l)
Keep the device away from children and animals.
m)
If this device is used together with another equipment,
the remaining instructions for use shall also be
followed.
REMEMBER! When using the device, protect children
and other bystanders.
Rev. 03.04.2020

PERSONAL SAFETY

a)
Do not use the device when tired, ill or under the
influence of alcohol, narcotics or medication which
can significantly impair the ability to operate the
device.
b)
The device is not designed to be handled by persons
(including children) with limited mental and sensory
functions or persons lacking relevant experience and/
or knowledge unless they are supervised by a person
responsible for their safety or they have received
instruction on how to operate the device.
c)
When working with the device, use common sense
and stay alert. Temporary loss of concentration while
using the device may lead to serious injuries.
d)
Do not overestimate your abilities. When using the
device, keep your balance and remain stable at all
times. This will ensure better control over the device
in unexpected situations.
e)
Remove all adjusting tools or spanners before turning
the device on.
f)
Compressed air may cause serious injury.
g)
The device is not a toy. Children must be supervised
to ensure that they do not play with the device.
SAFE DEVICE USE
a)
Make sure the pressure line is disconnected before
attempting any adjustments, accessory replacements
or doing any work on the device. Such a preventive
measure reduces the risk of an accident.
b)
When not in use, store in a safe place, away from
children and people not familiar with the device who
have not read the user manual. The device may pose
a hazard in the hands of inexperienced users.
c)
Keep the device in perfect technical condition. Before
each use check for general damage and especially
check for cracked parts or elements and for any other
conditions which may impact the safe operation of
the device. If damage is discovered, hand over the
device for repair before use.
d)
Device repair or maintenance should be carried out by
qualified persons, only using original spare parts. This
will ensure safe use.
e)
To ensure the operational integrity of the device, do
not remove factory-fitted guards and do not loosen
any screws.
f)
Avoid situations where the device stops working
during use due to excessive loading. This may result
in overheating of the drive elements and damage to
the
the device.
g)
Do not move, adjust or rotate the device in the course
of work.
h)
Clean the device regularly to prevent stubborn grime
from accumulating.
i)
Only use air to supply the device, do not use any other
gases.
j)
At locations where there is a high risk of mechanical
damage, use a reinforced hose for compressed air
connections.
k)
Before each use ensure the nozzle is correctly installed
in the device and that the hose is correctly attached
and undamaged.
l)
Do not carry or hang the device by the pressure line.
m)
Do not touch any moving parts or accessories
unless the device has been disconnected from the
compressed air supply.
5

Publicidad

loading