Electrical Safety; Extension Cords - Senix CSPE6.5-M Manual Del Operador

SPECIFIC SAFETY RULES FOR POLE
PRUNERS
WARNING!
Do not operate near electrical power lines. The unit has
not been designed to provide protection from electric
shock in the event of contact with overhead electric
lines, Consult local regulations for safe distances from
overhead electric power lines and ensure that the
operating position is safe and secure before operating
the saw chain pole pruner.
1. Wear head, and eye protection and personal
protective equipment (PPE), including correct
clothing.
2. Keep bystanders, especially children at a safe
distance during operation of the saw chain pole
pruner.
3. Keep all parts of the body away from the saw chain.
Do not remove cut material or hold material to be cut
when blades are moving. Make sure the switch is off
when clearing jammed material. Saw chain continues
to move after the switch is turned off. A moment of
inattention while operating the extended-reach pruner
may result in serious personal injury.
4. Carry the extended-reach pruner by the handle with
the saw chain stopped. When transporting or storing
the extended-reach pruner, always fit the saw chain
device cover. Proper handling of the extended-reach
pruner will reduce possible personal injury from the
saw chain.
5. Hold the extended-reach pruner by insulated gripping
surfaces only, because the saw chain may contact
hidden wiring. A saw chain contacting a "live"wire
may make exposed metal parts of the extended-
reach pruner "live" and could give the operator an
electric shock.
6. Keep cable away from cutting area. During operation
the cable may be hidden in shrubs and can be
accidentally cut by the saw chain.
7. Do not use the extended-reach pruner in bad
weather conditions, especially when there is a risk of
lightning. This decreases the risk of being struck by
lightning.
8. To reduce the risk of electrocution, never use near
any electrical power lines. Contact with or use near
power lines may cause serious injury or electric
shock resulting in death.
9. Always use two hands when operating the extended-
reach pruner. Hold the extended-reach pruner with
both hands to avoid loss of control.
10. Always use head protection when operating the
extended-reach pruner overhead. Falling debris can
result in serious personal injury.
SAVE THESE INSTRUCTIONS
ADDITIONAL SAFETY WARNINGS FOR
OPERATION
• Always disconnect the appliance from the power
supply before assembling, adjusting or cleaning, and
before leaving the machine unattended for any period.
4
• Checking the completeness, assembly and setting
of the tool (see details below) before start to work.
Repeat the checking regularly during your work.
• Always use the harness to carry the tool weight on
the shoulder. If you use the harness cross your body,
please learn how to use the quick release clamper on
the harness and keep it in front of your body.
• It is recommended that the unexperienced user
should have practical instruction in the use of the
pole saw and the protective equipment from an
experienced operator. The initial practice should be
cutting logs on a saw horse or cradle.
• This tool is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge,
unless they have been given supervision or
instruction concerning use of the appliance by a
person responsible for their safety. Children should
be supervised to ensure that they do not play with the
appliance.
• Children and juveniles, with the exception of
apprentices older than 16 years and under
supervision, may not operate the product. The same
applies for persons who do not or do not sufficiently
know how to handle the product.
• The operating instructions should always be ready to
hand. Persons unfit or tired must not operate the tool.
• Wait until the chain has come to a standstill completely
before placing it down.
• Any servicing should be performed by an authorized
service representative.

ELECTRICAL SAFETY

WARNING!
Do not permit fingers to touch the terminals of plug
when installing or removing the extension cord from the
plug.
1. Double insulated tools are equipped with a polarized
plug (one blade is wider than the other and will
require the use of a polarized extension cord. The
Pole Saw's plug will fit into a polarized extension
cord only one way. If the plug does not fit fully into
the extension cord, reverse the plug. If the plug still
does not fit, obtain a correct polarized extension
cord. A polarized extension cord will require the use
of a polarized wall outlet. This plug will fit into the
polarized wall outlet only one way. If the plug does
not fit fully into the wall outlet, reverse the plug. If the
plug still does not fit, contact a qualified electrician
to install the proper outlet. Do not change or alter
the equipment plug, extension cord receptacle, or
extension cord plug in any way.
2. Double insulation eliminates the need for the three-
wire grounded power cord and grounded power
supply system. Applicable only to Class II (double-
insulated) tools. This Pole Saw is a double insulated
tool.

EXTENSION CORDS

Use a proper extension cord. ONLY
listed by underwriters Laboratories (UL). Other
extension cords can cause a drop in line voltage,
use cords
WWW.SENIXTOOLS.COM