Outside Living Industries ubbink 400x610 Prospecto De Montaje página 9

WARRANTIES - After-sales service
Swimming pool 400x610 - H130 cm
Warranty conditions:
The swimming pool must be assembled within 48 hours of the package being opened.
For the warranty to be valid, a concrete slab must be in place.
Our warranty covers only the replacement of defective parts. It in no way covers demands for compensation or damages. The general warranty does not apply in the following circumstances:
• Use of the equipment in a way which is not in accordance with the instructions.
• Damage incurred as a result of bad handling during and after assembly.
1) Pump : 2 year warranty (electrical problems) under normal usage conditions. The following are not covered by the warranty: Deterioration by abrasion or corrosion, deterioration due to a faulty connection,
equipment dismantled or repaired by a third party, parts breaking (pump base, prefilter cover, hose connector...), running the pump when dry. The warranty is void if the electrical cable and/or the plug are
replaced, removed or damaged
2) Liner : 2 year warranty under normal usage conditions. The following are not covered by the warranty: Punctures, holes, tears, stains (treatment products directly in the water), stains due to algae growth, stains
due to decomposition of foreign bodies in contact with the liner, stains and decolouration due to oxidising products, colourfastness and wear due to rubbing on various surfaces. Deformation of the liner left without
water for more than 24 hours (never empty your swimming pool completely).
3) Filter : 2 year warranty on non-installed products: tank, drainage plug, collar, multiport valves... The following are not covered by the warranty: Watertightness problems following use of pressure greater than the
maximum authorised pressure. (ref. filter notice).
4) Skimmer : 2 year warranty on the seal joints.
5) Wooden structure : 10 year warranty against corrosion and insect attack. The following are not covered by the warranty: Changes in wood colour due to weather, natural deformations (splitting, cracks which
in no way impair the mechanical performance of the wood). The warranty does not cover assembly or storage faults producing deformations in the wall panels (if assembled a long time after the package being
opened), deformation of the planks which in no way impairs the mechanical performance of the swimming pool.
IMPORTANT : The after-sales service will be available only at point of sale.
Essential records for claiming the warranty: - Till receipt/proof of purchase.
- Warranty slip.
- Reference number of the faulty part.
Shop :
City :
Contact department :
Direct tel :
Code Ref. Désignation
M-1 7514095 Plank 45x145x1780
M-2 7100015 Plank 45x145x3880
2MI-C 7514036 Upper plank 45x135x1780
2MI-L 7100045 Upper plank 45x135x3880
2MS 7514039 Upper 1/2 plank 45x67x1780
2MI-C 7514041 Lower 1/2 plank 45x77x1780
7100095 Lower 1/2 plank 45x77x3880
2MI-L
MSS 7514045 Upper skimmer plank 45x135x1780
MIS 7514069 Lower skimmer plank 45x145x1780
MR 7514077 Water jet plank 45x145x1780mm - 2008
MRD 7514079 Double water jet plank 45x145x1780mm - 2008
PR 7514097 Post 45x135x1275mm (reinforcement)
7514114 Sacrifice part 45x135x280mm
PF 7514113 L-section finish 28x70x1260
C 7514048 Console edging 45x230x170
7514049 Wooden stop block for the skimmer flap 30 x 20 x170
L 7514096 Dressing lath 22x165x1275mm
PL 7100201 Pair of rungs for wooden ladder H120/130
T 7514052 Pine skimmer edging 28x145x600mm (flap)
MSD 7514054 Pine outer right skimmer edging 28x145x526mm
MSG 7514055 Pine outer left skimmer edging 28x145x526mm
MGI-M 7100210 Pine edging 28x145x1529 Int.
MGE-M 7100215 Pine edging 28x145x1653 Ext.
MGI-L 7100227 Pine edging 28x145x3629 Int.
MGE-L 7100229 Pine edging 28x145x3753 Ext.
BM-H 7514011 IPE 120 galvanised cradle - 3590 mm
BM-V 7514012 Complementary IPE 120 galvanised cradle - 1294 mm
7514214 Bag of 12 metal cradle bolts
7514149 Sandbag (25kg)
R 7514016 Hung 2.06 ml hanging rails
7514694 3-step stainless steel ladder
7504398 Poolmax TP 120 pump
7514705 Filtration 500
S 7514019 Skimmer large
JM 7514025 Anodised aluminium joint
7514030 Ground protection felt - 200g - 2m x 7m
7514129 Flexible pipe 50 mm diam. - 25 m long
7514147 Sweeping attachment
7514208 Plumbing kit
7514302 PVC tube 50 mm diam. - 1.5 m long
7514394 Delivery nozzle
7514695 Wall protection felt - 170gr - 1.35m x 16.50m
7514091 Bubble tarpaulin
Client :
Address :
City :
Tel :
Qty Qty
7514178
parcel ASS
49
Code Ref. BREAKDOWN OF THE HARDWARE KIT
16
- Console + reinforcer bag
A1
1
A3 - Console + reinforcer bag
2
B - Cradle cache bag
4
C - Hung rails bag
2
DMI - Edging screw bag
2
1
DMP - Edging screw bag
1
E - Skimmer flap bag
1
F - Aluminium edging joint bag
1
G - Wooden ladder + finishing profile bag
10
1
16
20
2
2
1
5
1
1
0*,0
6
0*(0
5
2
2
1
2
1
3
10
1
1
1
1
8
2
1
1
1
4
1
2
1
Hardware kit
1
Qté Qté
parcel ASS
2
1
3
2
1
1
1
1
1
0*(/
066
0,6
0*,0
35
0
7514006 Blue 75/100 liner 400x610 - H130cm
or
7514153 Beige 75/100 liner 400cm x 610 cm - H130 cm
3/
7
0*,/
06&
%0+
0,&
0'5
0
0,/
06/
1
1
%09