Using The Microphone - Trevi XF 1500 KB Manual Para El Uso Y La Conexión

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

ENGLISH
PLAY ON INPUT USB/MICRO SD
1. Switch the appliance on;
2. Insert a USB memory or an Micro SD card in the corresponding entries (8/7). Playback starts automatically;
3. To pause playback, press the
4. To resume playback, press the
:
5. Press
(4) button on unit
9
on unit
or
(4) on remote to go to the previous tracks;
6. Using the numeric keypad(7) on remote control you can directly enter the number of the song you want to play;
7. Press the button
(5) on the unit once, or the RPT button(12) on remote control, the display will show "ONE" (to reproduce
the same track continuously); press it a second time, the word "ALL" will appear on the display (to continuously play all the
tracks contained in the USB/Micro SD device).
Note:
-
The player may not support some USB/Micro SD devices, this is due to the incompatibility of some processors.
-
To avoid harmful interference, always connect USB devices directly to the unit, do not use extension cords.
-
From the computer to format the USB memory/SD FAT (16 or 32).
AUX-IN
1. Press the button
2. Connect any unit equipped with audio output, through a cable 3.5mm jack (included) to the AUX IN(9);
3. Use the external device from their commands.
AUX-OUT
This output(20) can be used to connect the unit to other amplified devices (by AUX-IN input) to increase audio and total power.
BATTERY AUXILIARY CONNECTION
The appliance is set up to connect an auxiliary battery if you were with the internal battery completely empty and there was no
possibility of connecting the appliance to a mains socket.
Use the rear socket (21) and connect an external 12V battery making sure to respect the indicated polarities.

USING THE MICROPHONE

1. Connect the supplied microphone into the jack MIC(11);
2. Turn on the microphone using the switch on the handle of the microphone to the ON position;
3. Adjust the volume(16) of the microphone inputand the echo effect(15) as desired using the appropriate commands;
4. Press the button(10) if you want to give priority to the microphone's voice compared to the music played (the music is auto-
matically lowered in volume when speaking with the microphone), press it again to return it to the normal condition.

(3) button on the unit or the key

(3) on the unit or on the remote control;
:
or key
(9) on remote control while listening to switch to the next track. Press the
(5) on the unit or press the button MODE(2) on remote control and select the "LINE IN" function;
Aux-out
DC 12V Input

(3) on remote control, the display will show "PAUS";
13
XF 1500 KB
9
(2) button

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido