Troubleshooting - Snapper BL48 Manual Del Propietário

TROUBLESHOOTING

PROBLEM
Motor fails to start
when switch trigger is
depressed.
Unit will not start.
The unit will start,
but air will not flow
through the tube.
Cruise Control Lever
doesn't work.
POSSIBLE CAUSE
Battery is not secure.
Battery is not charged. Charge the battery pack
Defective power switch. Have the power switch
Blocked tube.
The screw is loose.
16
SOLUTION
Ensure that the battery is
fully secured in the blower.
Refer to Installing the Battery
section in this manual.
according to the instructions
included with your model.
replaced by an authorized
service center.
Clear the blockage.
Tighten the screw with a
phillips head screwdriver.