Before Installation; Safety Installation Diagram; Open The Display Unit; Close The Display Unit - Panasonic CY-VHD9401U Instrucciones De Instalación

Before Installation

E
N
G
L
I
S

Safety Installation Diagram

H
1
≥ This unit opens and closes at the maximum dimensions given below.
Approximately 150 mm {5
Maximum
120˚
* Install the product in such a way as to maintain
the distances shown even when the display unit
is rotated by 30˚ toward the front seat headrest
(page 15).
WARNING:
Have a professional technician wire and install the product.
Professional skill and experience is required to wire and install the product. Improper installation could
result in failure of safety equipment resulting in accident and injury. For safety's sake, always ask the
store from which you purchased the product to install and wire it for you.
14
CY-VHD9401U/L
q}*
15 / Installation angle: Less than 20˚
16
Approximately 300 mm
q }
{11 13 /
16
Approximately
300 mm
q }
{11 13 /
16
Perform the adjustment below in order to provide the installation range shown in the fi gure on the left.

Open the Display Unit

[PUSH OPEN]
Maximum
120x
1 Push the display release button [PUSH OPEN]
until the display is unlocked.
(Press the button with one hand while holding
the display with the other.)
2 Open the display unit by both hands until a
comfortable viewing angle is reached.

Close the Display Unit

Move the display unit by both hands until the
display release button is locked.
Note:
≥ Always use both hands to open or close the
display unit.
≥ Always check that the display release button is
locked after closing the display unit.
≥ If the display unit cannot be locked, be sure to
consult your dealer and remedy the situation.
Display Unit Lateral Angle
Adjustment
30x
30x
You can swivel it to the left and right, 30e each way.
Hold the display unit by the non-slip part in the
upper half of it and adjust its lateral angle.
CY-VHD9401U/L
E
N
G
L
I
S
H
2
15