Maintenance Chart - Scag FREEDOM Z SFZ Manual Del Operador

Section 7
7.1 MAINTENANCE CHART - RECOMMENDED SERVICE INTERVALS
HOURS
Break-In 8 20 40 100 200 400
(First 10)
X
X
X
X
X
X
X
X
X
X
X
X
* Perform these maintenance procedures more frequently under extreme dusty or dirty conditions.
MAINTENANCE
Procedure
Check all hardware for tightness
Check hydraulic oil level
Check all belts for proper alignment
Check hydraulic hoses for leaks
Check seat belts for damage
Check engine oil level
*Clean mower
Check condition of blades
Check tire pressure
Change engine oil and filter
Check battery,
clean battery posts and cables
Check belts for proper alignment
X Check Operator Pressence System
X Change engine oil
X Drain hydraulic system, replace
hydraulic oil and filters
X *Clean air cleaner element
X Check hardware for tightness
X Change engine oil and filter
X Check hydraulic oil level
X Replace engine fuel filter
X Drain hydraulic system, replace
hydraulic oil and filters
X Adjust electric PTO clutch
27
Comments
See paragraph 7.2
See paragraph 7.7
Use extreme caution when
checking the hydraulic hoses
See paragraph 2.6
See paragraph 2.5
See paragraph 7.3
See paragraph 7.10
See paragraph 7.8
See paragraph 7.9
See paragraph 7.3
See paragraph 7.6
See paragraph 7.7
See paragraph 2.3
See paragraph 7.3
See paragraph 7.2
Use SAE 20W50 Motor Oil
See paragraph 7.5
See paragraph 7.3
See paragraph 7.2
See paragraph 7.4
See paragraph 7.2
Use SAE 20W50 Motor Oil
See Scag Dealer