Craftsman professional 152.221240 Manual Del Operador página 13

OUTFEED TABLE
50. Outfeed table assembly
51. Hinge assembly (2)
52. Clamp knob
53. Upper support assembly
54. Lower support
55. Support retainer
• Hardware Pack for Biesemeyer Fence Rails
(#OR91669) includes: (Hardware finish is Zinc)
Flat Washer M8 (2)
Flat Washer 5/16" (9)
Lock Washer M8 (2)
Lock Washer 5/16" (9)
Lock Washer 1/4" (6)
Flat Head Screw 5/16-18 x 2" (6)
Hex Head Screw M8 x 25mm (2)
Hex Head Screw 5/16-18 x 1-1/2" (3)
Hex Head Screw 1/4-20 x 1/2" (4)
Hex Head Screw 1/4-20 x 3/4" (2)
Hex nut 5/16-18 (9)
• Hardware Pack for Biesemeyer Fence (#OR91666)
includes: (Hardware finish is Zinc)
Flat Washer #10 (4)
Round head Screw 10-32 x 3/8" (4)
Knob (Black) (not shown)
Cursor (not shown) (2)
Fig. 3-4
50
51
Hardware packs are not identified or labeled. See hardware
diagram to help in finding the correct part. See figure 3-5.
52
53
• Hardware Pack for Extension Wings (#OR92013)
includes: (Hardware finish is Black Oxide)
Flat Washer M8 (8)
Lock Washer M8 (8)
Hex Head Screw M8x1.25 x 30mm (8)
• Hardware Pack for Outfeed Table (#OR92015)
includes: (Hardware finish is Black Oxide)
Clamp Knob
Flat washer M5 (16)
Flat Washer M6 (2)
Lock Washer M5 (8)
Lock Washer M6 (2)
Hex Head Screw M5 x 16mm (8)
Hex Head Screw M6 x 25mm (2)
Hex Head Screw 6 x 35mm (2)
Hex Nut M5 (8)
Hex Nut M6, Nylok (2)
• Miscellaneous Hardware: (Hardware finish is
Black Oxide)
Sheet Metal Screw M4 x 8mm (6)
Sheet Metal Screw 1/4-20 x 3/8" (4)
13
55
54