Yakima DryDock Manual Del Usuario

IMPORTANT WARNING!
IT IS CRITICAL THAT ALL YAKIMA
RACKS AND ACCESSORIES BE
PROPERLY AND SECURELY
ATTACHED TO YOUR VEHICLE.
IMPROPER ATTACHMENT COULD
RESULT IN AN AUTOMOBILE
ACCIDENT, AND COULD CAUSE
SERIOUS BODILY INJURY OR
DEATH TO YOU OR TO OTHERS.
YOU ARE RESPONSIBLE FOR
SECURING THE RACKS AND
ACCESSORIES TO YOUR CAR,
CHECKING THE ATTACHMENTS
PRIOR TO USE, AND
PERIODICALLY INSPECTING THE
PRODUCTS FOR ADJUSTMENT,
WEAR, AND DAMAGE.
THEREFORE, YOU MUST READ
AND UNDERSTAND ALL OF THE
INSTRUCTIONS AND CAUTIONS
SUPPLIED WITH YOUR YAKIMA
PRODUCT PRIOR TO
INSTALLATION OR USE. IF YOU
DO NOT UNDERSTAND ALL OF
THE INSTRUCTIONS AND
CAUTIONS, OR IF YOU HAVE NO
MECHANICAL EXPERIENCE AND
ARE NOT THOROUGHLY FAMILIAR
WITH THE INSTALLATION
PROCEDURES, YOU SHOULD
HAVE THE PRODUCT INSTALLED
BY A PROFESSIONAL INSTALLER
SUCH AS A QUALIFIED GARAGE
OR AUTO BODY SHOP.
1033016C - 1/18
DryDock
RECOMMENDED TOOLS:
• 2 - 9/16" wrenches or
2 adjustable-end wrenches
• 15/16" or 7/8" socket wrench
• Tape measure
READ THESE WARNINGS
• OFF-ROAD DRIVING is not recommended and could result
in damage to your vehicle or your boat.
• This product is designed for a
2" hitch receiver, class II or greater.
• A potential weak link is the hitch receiver and the structure
on which it is mounted.
• If you do not know the capabilities of your hitch receiver,
seek a professional to assess your receiver and its mounting.
This carrier is designed
for touring kayaks or
canoes.
Part #1033016 RevC