Functions - Duux Motion Manual De Usuario

correspond to the voltage of the device. If you
are unsure whether your connections meet the
requirements, consult an electrician or your
electricity supplier.
• Do not lift the device when water tank is full of
water, or it will overflow or spill.
• Only after taking out remaining water in the water
tank you may lift the device.
• Always lift the device with the handles on the side.
Never carry with the water tank handle.
Installing the device
Unpack the device and remove the packing
1
materials from the unit. Store the packing
materials for possible future transportation.
Plug the power cord in a wall outlet. The LED
2
matrix display will activate for 2 seconds and
you will hear a beep sound,
Press the power button to switch on the
3
device.
Filling the water tank
Note: Always remove the plug when filling the
water tank. Preferably use clean tap- or distilled
water to prevent bacteria and scale inside the water
tank.
6
Please add water to water tank before using the
device according to the steps below:
Remove the power plug and take out the water
1
tank by pulling the handle on the back side
Fill the water tank with tap water
2
3 Place back the water tank until you hear a click
feedback
4 You may now switch on the device.
1 2
3 4
Note: When using the device for the first time,
the water may have a slight smell and discoloration.
This is normal and not harmful for your health.

3. Functions

1 2
Control panel
Power
1
Humidity output / wind speed (high,
2
medium, low, weak)
Hygrostat (40-70%)
3
Timer (1-12H)
4
Night mode
5
3 4 5
Display notifications
HI! – welcome message
OFF – goodbye message
SL – slow humidity output / wind speed
LO - low humidity output / wind speed
MI - medium humidity output / wind speed
HI - high humidity output / wind speed
Lo / NO! – Empty water tank.
1h – Timer setting (1-12h)
ZZZ – Night mode on
ZZZ – Night mode off
40%-70% - Hygrostat setting
48% - Ambient humidity
7