ABC Design Risus Manual Del Usuario página 16

4. Securing the baby seat in the car
NB: The baby seat may not be used on seats which are fitted with an airbag. Disable the airbag if necessary.
Always fit the baby seat facing against the direction of travel (1). Pull the lap restraint through the recesses
provided (2). Click the end of the lap restraint in the buckle for the three-point seat belt. Run the shoulder
belt around the rear of the seat (3) and feed it through the guide provided on the rear of the baby seat (4).
Tighten the belt. Make sure that the belt is not twisted and that the baby car seat is properly secured..
5. Adjusting the handle
The handle has four possible positions:
1. Travelling position
2. Carrying position
3. Rocking position
4. Sitting position
To adjust the handle, press the buttons on both sides of the handle. Now you can adjust the handle. Make
sure that the handle engages in the chosen position.
EN - 12