Troubleshooting - Sage BTM700 Guía Rápida

Troubleshooting

PROBLEM
The Tea Maker™ Compact
does not switch on
The Tea Maker™ Compact
power base does not
illuminate and functions
cannot be selected.
The Tea Maker™
Compact does not work
I cannot select a
certain function
After boiling water,
bubbles appear around
the temperature sensor
My tea tastes too
weak or too strong
The tea basket is
not moving
12
WHAT TO DO
• Check the power plug is securely inserted into the outlet.
• Insert the power plug into an independent outlet.
• Insert the power plug into a different outlet.
• Reset the circuit breaker if necessary.
• For additional safety the Tea Maker™ Compact is fitted with a thermal
cut out. In the event of severe overheating, the Tea Maker™ Compact
will automatically shut down to prevent further damage
• Remove the power plug from the wall outlet, then reinsert. Remove
and replace the glass jug from the power base. All buttons should
now illuminate and the Tea Maker™ Compact is ready for use.
• Check the glass jug is securely positioned on the power base.
• Certain features cannot be selected or changed during the heating
or brewing cycle. LED lights surrounding the buttons will indicate
the availability of the functions.
• This is normal for the functionality of the Tea Maker™ Compact.
• Ensure the correct strength was selected prior to brewing.
• Follow the cleaning instructions in this booklet.
• The tea basket will not move during the heat up cycle.
• The tea basket will only start moving once the selected temperature
has been reached. The tea basket will remain lowered until the
steeping time has passed.
• Remove the plug from the wall outlet, wait 10 seconds then reinsert the
plug.