Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
HOW TO USE YOUR
PERSONAL DRINK BLENDER
TIPS:
•
Reinsert Gasket into Blade Assembly and securely retighten the
Blade Assembly clockwise onto the top of the Cup.
•
Place the Base on a flat and stable surface, and then place the
assembled Cup onto the Base by aligning the mark on the
bottom edge of the Blade Assembly with the mark on the
Base and turning counter-clockwise until it is firmly in place.
•
Remove assembled Cup from the Base and unscrew Blade Assembly.
•
The Cup has a 28 fl. oz. (3.5 Cups) capacity. Do not fill the Cup with
food or liquids past the 28 fl. oz. mark.
•
Do not operate the blender while empty.
•
Always ensure that the blender is unplugged from the electrical
outlet before use.
1)
Pour liquid ingredients into the Cup, and/or cut all solid ingredients
into pieces small enough to fit.
2)
Ensure the Gasket is securely seated in the Blade Assembly.
Securely tighten the Blade Assembly clockwise back onto the
top of the Cup.
3)
Place the assembled Cup onto the Base by aligning
the mark on the bottom edge of the Blade Assembly with the
mark on the Base. Turn counterclockwise to lock firmly in place.
Plug the blender into a standard 120-volt AC electrical outlet.
Turn the Control Knob to the BLEND position for continuous
operation, or turn and hold in the PULSE position to operate in
short bursts (the motor will operate only when the Control Knob
is held on PULSE).
Turn off the blender by turning the knob to OFF and then unplug
the blender from the electrical outlet.
When the Blades have stopped, remove the assembled Cup from
the Base and turn the Cup right-side up.
4)
Unscrew the Blade Assembly counter-clockwise from the Cup.
Empty the contents into a separate container or screw a Spill-Proof
Lid onto the Cup to consume contents directly.
www.maxi-matic.com
4
info@maxi-matic
Publicidad
Tabla de contenido
