Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
BLENDING TIPS
•
When blending ice, use up to five cubes at a time. Use the Pulse setting to break up the ice into
small pieces before continuing.
•
Do not use the blender for mashing or grinding heavy foods (e.g., potatoes or meats) or to stir thick
mixtures (e.g., dough). It cannot whip egg whites or substitute dairy toppings.
•
Pour liquid ingredients into the blending cup first unless a particular recipe says otherwise.
•
Cut all fruits or vegetables into smaller pieces that are approximately ¾-inch to 1-inch.
•
Do not overfill the blending cup.
•
Do not operate the blender's motor for more than two minutes at a time. Allow the motor to cool
for 60 seconds after two minutes of operation.
•
If the Blades are not operating smoothly, stop the blender and add some liquid, or reduce the solid
contents in the Cup.
CLEANING AND
MAINTENANCE
CAUTION: Always ensure the blender is unplugged from the electrical outlet before relocating,
assembling, disassembling, or cleaning.
•
Immediately after each use, clean the blender as instructed below.
1.
Remove the Blade Assembly from the Cup by turning the Blade Assembly counter-
clockwise.
CAUTION: Handle Blades carefully, as they are sharp.
2.
Wash all parts except the Base and Power Cord in warm, soapy water, then rinse and dry
thoroughly.
NOTICE: Do not immerse the Base or Power Cord in water or other liquids, and do not
place any parts of the blender into a dishwasher or extremely hot water. Do not use
abrasive cleaners to clean any part of the blender.
3.
Reinsert Gasket into Blade Assembly and securely retighten the Blade Assembly clockwise
onto the top of the Cup.
•
Use a small brush (not included) if necessary to remove particles of food lodged underneath the
Blades.
•
Store the blender in a cool, dry place.
www.maxi-matic.com
Remove Gasket from Blade Assembly.
Electrical Specifications
Voltage
120 VAC
Frequency
60 Hz
5
Wattage
300 W
info@maxi-matic
Publicidad
Tabla de contenido
