Glaziar Predator S40 Manual De Instrucciones página 47

4. Dehumidifying operation
Press the "Mode" button till the "Dehumidify" icon appears .
– Automatically set the selected temperature to current room temperature minus 2ºC.
(16ºC-31ºC)
– Automatically set the fan motor to LOW wind speed.
5. Fan operation
– Press the "Mode" button till the "Fan" icon appears.
– Press the " WIND" button to select wind speed.
6. Heating operation (this function is not available for a cold-single unit)
– Press the "Mode" button till the "Heat" icon appears.
– Press the "DOWN"or "UP" button to select a desired room temperature. (16ºC-31ºC)
– Press the "WIND" button to select wind speed.
7. Timer operation
Timer ON setting:
– When the air-conditioner is OFF, press the "Timer" button and select a desired ON time
through the temperature and time setting buttons.
– "Preset ON Time" is displayed on the operation panel.
– ON time can be regulated at any time in 0-24 hours.
Timer OFF setting
– When the air-conditioner ON, press "Timer" button and select a desired OFF time
through the temperature and time setting buttons.
– "Preset OFF Time" is displayed on the operation panel.
– OFF time can be regulated at any time in 0-24 hours.
8. SLEEP CONTROL FUNCTION
– While in cooling mode, press the SLEEP key to set the temperature. It increases1ºC
after an hour and at most increases 2ºC after 2 hours.
– While in heating mode, press the SLEEP key to set the temperature. It decreases 1ºC
after an hour and at most decreases 2ºC after 2 hours.
– Press the SLEEP key again can cancel the setting.
45