3. Add 2‐3 drops of the desired essential oil into the water.
4. Replace the ceramic cover on the tank cover by turning it to ensure it fits over the tank cover.
There should be no gap
5. Insert the small end of the power adapter into
the DC IN socket at the bottom of the diffuser.
6. Plug the power adapter into the mains socket.
INFORMATION ON THE USE OF ESSENTIAL OIL
• Use 100% natural essential oil.
• Use water soluble essential oil only.
• Do not apply undiluted essential oils onto skin.
• Do not ingest essential oils.
• If you want to change the essential oil, turn off and
disconnect the diffuser from the power adapter. Remove
the cover and empty the water tank, clean the inside of the
water tank with a soft clean cloth or paper towel. Fill the
water tank with water again and add drops of a new
essential oil into the water tank. Follow the instructions to
operate the diffuser.
5
Max water level
line 100ml
EN