4) Only for filtering versions: Secure the air baffle (G)
to the lower flue using 2 screws.
5) Make the electrical connection of the hood by
means of the power cable (refer to the paragraph
"Electrical connection").
6) Fit the decorative flue resting it on the hood Lift
the upper flue up to the ceiling and secure it by
means of the 2 screws (H).
7) Only for filtering versions;
One or more charcoal filters are required for the
filtering version. If they are not yet installed in the
hood, fit it/them as follows:
fit the charcoal filter by turning it anticlockwise.
The ducting version does not require the charcoal
filter/s, therefore, if already fitted in the hood remove
it/them.
GB
11