Technical Specifications - ResMed Airmini Manual De Instrucciones

1. Attach the wall module to the wall with
screws and/or adhesive double-sided tape
(not included).
2. Slide the AirMini into the mount.
3. Hold the mount at an angle and push it onto
the wall module. Adjust the angle to fit the
mount in place.
4. Turn the mount clockwise until it locks into
place.
WARNINGS
• Read instructions before use.
• Do not attempt to modify the mount
system. There are no user-servicable parts
in the mount system.
Note: For any serious incidents that occur
in relation to this product, these should be
reported to ResMed and the competent
authority in your country.

Technical specifications

Gross Dimensions
Mount (excluding modules): 87 mm (H) x 107 mm (W) x
42mm (D) (3.4" (H) x 4.2" (W) x 1.7" (D))
Wall module screw max diameter: 2.5mm
Design Life: 12 months.
7