Setting the remaining operating time
Press the
and
buttons to set the required remaining operating time (1 to
120 minutes). The remaining operating time is the time during which the heater
continues to operate. It can only be changed while the heater is operating and
GB
the ignition is off.
Setting the alarm time
An alarm time can only be programmed with the standard clock.
The alarm time is not fixed to a particular day of the week. Press the
button
several times until the bell symbol
appears on the display. Press
the
and
buttons to set the required alarm time.
The alarm switches off after 5 minutes or when any of the buttons is pressed.
Checking/deleting the alarm time
Press the
button several times until the bell symbol
appears on the dis-
play – read off the alarm time. Deleting the alarm time: Press the button until
the bell symbol
no longer appears on the display.
23