Crosley CRD2121NW Guía De Uso Y Cuidado página 5

Installation
Reversing Doors
Tools Required :
• 5/16 " end wrench
• Phillips screwdriver
• Putty knife
• 5/16 " socket and ratchet
Unplug the refrigerator.
1. Pry off hinge cap with a putty knife and set aside.
2. With a 5/16 " socket and ratchet, remove screws from the
upper hinge and set aside.
3. Carefully lift and remove freezer door (including the upper
hinge) off the center hinge.
4. With a 5/16 " socket and ratchet, remove the screws and
middle hinge from the top of refrigerator door.
With a putty knife, pry out the plug buttons and replace them
on the opposite side.
5. Carefully lift and remove refrigerator door.
6. Remove front base grille and set aside (see p. 3).
7. With a 5/16 " socket and ratchet, remove hinge plate from
lower corner of refrigerator and secure it on the opposite
side.
8. Remove plate from the underside of refrigerator door and
secure it on the opposite side with a 5/16 " socket and
ratchet.
9. With a 5/16 " socket and ratchet, remove the doorstop from
the underside of the freezer door and secure it on the
opposite side.
10. With a putty knife, pry out the plug button(s) from tops of
freezer and refrigerator doors and replace them on the
opposite side.
11. Remove screw hole plugs from top of cabinet and replace
on the opposite side.
12. With a 5/16 " socket and ratchet, remove washers and
stem from the inside of the hinge plate and place them on
the outside of the hinge plate.
13. Carefully replace refrigerator door on the hinge plate in
lower corner.
14. Attach the middle hinge with the screws removed from the
opposite side and secure them using a 5/16 " wrench.
15. Carefully place freezer door on top of hinge arm.
Use foam door spacer to set gap.
Note
• Do not discard the foam door spacer.
Doors may settle with use.
16. Slide top hinge into place on freezer door and secure
screws with 5/16 " wrench.
Confirm that all screws have been tightened securely.
17. Snap hinge cap securely in place.
18. Replace front base grille (see p. 3).
Remember to plug in your refrigerator and reset the
controls to the appropriate setting(s).
E
4