Connection And Control Devices - ESAB ESABMig 405 Instrucciones De Uso

GB
6 OPERATION
General safety regulations for the handling of the equipment can be found on
page 56. Read through before you start using the equipment!
WARNING – TIPPING RISK!
There is a risk of tipping while transportation and operation, if the welding machine leans
o
more than 10 . In that case appropriate securing has to be provided !
6.1

Connection and control devices

1 Mains supply switch
2 Main supply switch for cooling unit ELP**
3 Switch, precise control
4 Switch, coarse control
5 Indicating lamp, power supply ON
6 Orange indicating lamp, overheating and
loss of coolant*
7 Space for digital meter (optional), see page
203
Connection for return cable (–), high induc-
8
tance
NOTE! Cooling water connections only available on certain models.
* Indicating loss of coolant, only when water flow guard is used, see point 6.2.4
** ELP = ESAB Logic Pump, see point 6.2.3.
405,505e
9 Connection for return cable (–), medium in-
ductance
10 Connection for return cable (–), low induc-
tance
11 Connection for welding current cable (+)
12 Connection for control cable for wire feeder
13 MCB
14 Connection RED for cooling water from the
wire feed unit
15 Connection BLUE for cooling water to the
wire feed unit
– 64 –