Solutions - Ozonovid HM-10.000-OG Manual De Usuario

7.2. How to clean the particulate filter?
Remove the air filter with a flat screwdriver.
1º
Remove the filtering mesh.
2 º
Wash the filter with water and dry it with
3 º
and absorbent paper.
*It is highly
maintenance every time you notice that the filter is
dirty. It will depend on the dirt and the air humidity in
the surrounding area. It is also advisable to observe
this on a regular basis.
*If you have any question, please contact Ozonovid.

8. Solutions

If you consider that the generator is not working properly, carry out the following
checks.
The generator of properly connected to the mains.
The mains outlet is working properly.
The ozone plates are clean, dry and without cracks. If the
plate presents cracks, this could produce a malfunction in
the equipment.
The fuse is well installed and working properly. If you need to
change it, remove the holder where the 2 fuses are stored
with aid of a screwdriver. The inner one is the running
fuse and the outer one is the spare fuse. Turn the screw
anticlockwise to unscrew it and change it for the spare fuse.
It is of great importance that the generator is properly
grounded through the power wire to prevent any possible
shock.
In case that the fan is not working properly and the buzzing
is not being heard, please contact with the distributor.
900 649 149 ozonovid@ozonovid.es
recommended to repeat
User Manual Ozone Generator
this
14