Installation Instructions - Dandy DCR059WE Guía A Utilizar Y A Cuidar Del Proprietario

DOOR REVERSAL
INSTRUCTIONS
1) To access the lower hinge assembly, tilt back the cabinet or
lay the refrigerator on its back. (Fig. A)
2) Remove both leveling legs located at the front of the cabinet.
3) Remove the screws holding the lower hinge assembly to the
cabinet.
4) Remove the main door assembly from the cabinet (lift door
slightly and pull downward).
5) Using a flat heat screwdriver, remove the main door top
hinge pin. (Fig. B)
6) Re-install the main door top hinge pin on the opposite side of
the cabinet.
7a) Remove the door plug and door bushing located on the top
of the main door.
7b) Interchange their positions (eg. door plug right side, door
bushing left side).
8) Re-install main door assembly on cabinet.
9) Remove door bushing (bottom door) and install on opposite
side.
10) Re-install the lower hinge assembly on the opposite side.
11) Make sure the door assembly is properly aligned on the
cabinet before tightening lower hinge screws.
12) Re-install both leveling legs.
The process is now complete.

INSTALLATION INSTRUCTIONS

CAUTION: To avoid personal injury to yourself and/or property, we
recommend someone assist you during the door reversal process.
Fig. A
Fig. B
3