Ardo TLN106EW Guía De Referencia Rápida página 6

6
Detergent dispenser:
Prewash
Wash
Softener
Bleach
CORRECT WASHING PROCEDURE
Before using the washing machine, make sure that it has been installed correctly as reported
in the instruction book.
Daily use
1. Before placing the laundry in the washing machine, empty the pockets of any hard or sharp objects
(nails, screws, coins, pins, stones) which could damage the machine and ruin the clothing.
2. Open the top of the washing machine, lightly pressing downwards before lifting it.
3. Open the doors of the drum, pressing them lightly with one hand, while pressing the opening button
with the other.
4. To improve the washing performance, load the laundry loosely without pressing on it, in order to
avoid overloading the machine. An entire load of particularly absorbing fabrics, such as sponge
towels and bathrobes, can unbalance the machine during the spin cycle. The automatic load-
balancing system places the laundry in the most homogeneous way possible and sets the optimal
spin speed to reduce vibrations to a minimum.
5. Close the drum doors making sure they are well hooked.
6. Dose the right amount of detergent in the appropriate chamber II. Add extra detergent in the chamber
I if you want to activate the prewash option. For softeners and bleaches, use the chamber marked
with the symbols ( ) and (
7. Select the washing program suitable for the type of fabrics using the E knob, following the instruc-
tions carried on the program table.
8. With A, B and C buttons, supplementary functions can be selected. The options chosen are
indicated by their relative LEDs turning on. The duration of the wash cycle varies depending on
the options activated.
9. Press the D button to start the wash cycle. After a few seconds, the Start LED will stay lit to
indicate that the wash programme has started.
10. The end of the wash cycle is indicated when the end LED fl ashes. Place the E knob back at
the stop position, open the top cover and the drum doors and take the laundry out.
11. The program can be cancelled at any time by turning the E knob back to the stop position.
GB
WASHING GUIDE
Control panel:
A Prewash button
B Turbo button
C No spin
).
D Start button
E Programme selector knob
F Start / END LED
SM2717