Publicidad
Idiomas disponibles
Idiomas disponibles
English
Switching the Eurolyser smart laboratory photometer on and off
Start up the smart laboratory photometer by connecting the power supply (AC adaptor plug) to the
device and plugging the power cable into the wall socket.
0453172b-2413-4271-9898-33b9292ff0b1 / DP1.0
It is not necessary to disconnect the smart laboratory photometer
from the power supply after analyses have finished.
The device is equipped with an automatic standby function. When
LED
it remains idle in the main menu for 10 minutes with no further
operating commands, it switches into standby mode and dims the
display lights.
The green LED light on the front remains illuminated.
To switch from standby mode to operational mode, just touch the
display.
Use only your fingers to touch the display! Never use a hard or
pointed object.
Do not use liquid cleaners on the display. Use a lint-free,
slightly damp cloth only.
Do not attempt to open or close the door manually.
Power supply
6 / 12
Eurolyser Diagnostica GmbH
Publicidad
