Descargar
Compartir
Imprimir esta página
  1. Manuales
  2. Marcas
  3. Macrom Manuales
  4. Amplificadores
  5. M2A.1000
  6. El manual del propietario

Macrom M2A.1000 El Manual Del Propietario

Ocultar thumbs
1
2
3
4
5
6
7

Publicidad

Enlaces rápidos

Descargar este manual
M2A.1000
Owner's Manual

Publicidad

loading

Manuales relacionados para Macrom M2A.1000

Resumen de contenidos para Macrom M2A.1000

  • Página 1 M2A.1000 Owner’s Manual...

  • Página 2: Front/Rear View

    Front/Rear view 16 17 2 Ω Low Level Input High Level Input Gain Controll Low pass cutting adjustment Sub Sonic adjustment Bass Boost adjustment EBC (External Remote control) EBC ON/OFF switch Led indicator Line Output Fuses 12V (DC) power terminal Remote terminal GND terminal + Terminal...

  • Página 3: Technical Data

    Features • Class D mono channel power amplifier • 500 watts into 2 ohms load • 300 watts into 4 ohms load • P-Mosfet on amplifier stage • Variable Low pass x-over at 24dB/oct • Variable Sub sonic filter from 20 to 50Hz at 24dB/oct •...
  • Página 4 Crossover and Setting (Eng) The cut frequency is selectable between 30 to 300 Hz. Low pass cutting adjustment (FR) La fréquence de coupure passe bas est réglable de 30 à 300Hz. (IT) La frequenza di taglio è selezionabile fra 30 a 300 Hz. ����...
  • Página 5 Speakers connection � � � � ������ ������ ������� � � (Eng) Minimal acceptable Impedance 2 ohm. To adhere itself to the illustrations for the connections. (FR) Impédance minimale 2 ohm. Suivre les illustrations pour les branchements. (IT) Minima Impedenza accettabile 2 ohm. Attenersi alle illustrazioni per i collegamenti (D) Minimale Anschlußimpedanz 2 Ohm.

  • Página 6: Power Connection

    Power connection ���� �� �������� ������ CAR CHASSIS CAR CHASSIS (Eng) Connect the Positive (+12V) directly to the Battery of the car. To make sure itself to insert a fuse of adequate amperage in order protect the system. Connect the Ground in to the car chassis, close as possible to the amplifier. (FR) Relier la borne +Battery de l’amplificateur directement à...
  • Página 7 Input setting (Eng) Connect the output Audio coming from the car radio, in to the Low level input of the amplifier. Low Level Input (FR) Relier l’output Audio provenant de l’autoradio, au input Low level de l’amplificateur. (IT) Relier par un câble RCA de bonne qualité les sorties RCA de l’autoradio aux entrées “Input” RCA de l’amplificateur.