Front/Rear view 12 13 20 21 24 25 Low Level Input Fuse (CH1/CH2) High Level Input 12V (DC) power terminal (CH1/CH2 & CH3/CH4) Gain Control Remote terminal (CH1/CH2) High pass switch GND terminal (CH1/CH2) High pass cutting adjustment + CH1 terminal (+ MONO) Input Mode selector - CH1 terminal Output Mode selector...
Página 3
Input setting CH1/CH2 (Eng) Connect the output Audio coming from the car radio, in to the Low level input of the amplifi er. Low Level Input (FR) Relier l’output Audio provenant de l’autoradio, au input Low level de l’amplifi cateur. (IT) Collegare l’uscita Audio proveniente dall’autoradio, all’ingresso Low level dell’amplifi...
Página 4
Input setting CH3/CH4 (Eng) Connect the output Audio coming from the car radio, in to the Low level input of the amplifi er. Low Level Input (FR) Relier l’output Audio provenant de l’autoradio, au input Low level de l’amplifi cateur. (IT) Collegare l’uscita Audio proveniente dall’autoradio, all’ingresso Low level dell’amplifi...
Página 5
Crossover setting CH1/CH2 (Eng) Select “FLAT” for a compleate frequency range. Flat switch (FR) Choisissez “FLAT” pour une gamme de fréquence de compleate. (IT) Selezionare “FLAT” per una completa risposta in frequenza. (D) Wählen Sie “FLAT” für einen compleate Frequenzbereich vor. (SP) Seleccione “FLAT”...
Página 6
Crossover setting CH3/CH4 (Eng) Select “FLAT” for a compleate frequency range. Flat switch (FR) Choisissez “FLAT” pour une gamme de fréquence de compleate. (IT) Selezionare “FLAT” per una completa risposta in frequenza. (D) Wählen Sie “FLAT” für einen compleate Frequenzbereich vor. (SP) Seleccione “FLAT”...
Página 7
Input/Output Mode setting (Eng) Loudspeakers confi guration in function of the Inputs and Set up. (FR) Confi guration de haut-parleurs en fonction des entrées et de l’installation. (IT) Confi gurazione altoparlanti in funzione degli ingressi e Set up. (D) Lautsprecherkonfi guration in Abhängigkeit von den Eingängen und aufgestellt. (SP) Confi...
Página 8
CH1/CH2 Speakers connection � � ��� ���� � � ��� ��� � ��� (Eng) Minimal acceptable Impedance 2 ohm. To adhere itself to the illustrations for the connections. (FR) Impédance acceptable minimale 2 ohms. Pour s’adhérer aux illustrations pour les raccordements. (IT) Minima Impedenza accettabile 2 ohm.
Página 9
CH3/CH4 Speakers connection � � ��� � ���� � ��� ��� � ��� (Eng) Minimal acceptable Impedance 2 ohm. To adhere itself to the illustrations for the connections. (FR) Impédance acceptable minimale 2 ohms. Pour s’adhérer aux illustrations pour les raccordements. (IT) Minima Impedenza accettabile 2 ohm.
Power connection ���� �� �������� ������ CAR CHASSIS CAR CHASSIS (Eng) Connect the Positive (+12V) directly to the Battery of the car. To make sure itself to insert a fuse of adequate amperage in order protect the system. Connect the Ground in to the car chassis, close as possible to the amplifi er. (FR) Reliez le positif (+12V) directement à...
Features • Four channel power amplifi er • 90 watts into 2 ohms load • 60 watts into 4 ohms load • TO3P transistor on amplifi er stage • Variable 18/12dB/oct Low-High-Band pass x-over on rear section • Variable 12dB/oct High pass x-over on front section •...