Operation
Turn on the power and check the operation of your fan.
There are two pull chains available in your fan.
The fan pull chain controls the fan speed as follows:
1 pull- High, 2 pulls- Medium, 3 pulls- Low, and 4 pulls- Off.
The light kit pull chain turns the light "ON" or "OFF"
The reverse switch is located on the surface of the switch housing.
This switch controls directions: forward (switch down) or reverse
(switch up).
NOTE: Wait for the fan to stop before reversing the direction
of the blade rotation.
Warm weather - (Counterclockwise Direction) A downward air flow
creates a cooling effect. This allows you to set your air conditioner
on a higher setting without affecting your comfort.
Cool weather - (Clockwise Direction) An upward air flow moves
warm air off the ceiling. This allows you to set your heating unit on
a lower setting without affecting your comfort.
Care and Cleaning
Do
□
Check the support connections, brackets, and blade
attachments twice a year. Ensure they are secure.
Because of the fan's natural movement, some
connections may become loose over time. It is not
necessary to remove the fan from the ceiling.
□
Clean your fan periodically. Use only a soft brush or
lint-free cloth to avoid scratching the finish. The plating is
sealed with a lacquer to minimize discoloration or
tarnishing.
□
(Optional) Apply a light coat of furniture polish to the wood
blades.
□
(Optional) Cover small scratches with a light application of
shoe polish.
Do not
□
Do not use water when cleaning. Water could damage the
motor, or the wood, or possibly cause an electrical shock.
□
Do not apply oil to your fan or motor. The motor has
permanently-lubricated sealed ball bearings.
1 1
Please contact 1-877-527-0313 for further assistance.
HOMEDEPOT.COM