Normal Operation Conditions; Rated Electrical Specifications - DAKO FDM200HSYDBB1 Manual Del Usuario

Problem
Interior light does
not turn on
The freezer door
can not be properly
closed
Loud noise

Normal operation conditions

• The freezer compartment may emit
heat during operation especially
during summer. This is caused by
the radiation of the condenser and
is normal.
• Condensation may be noticed on
the exterior surfaces of cabinet and
door seals, when the ambient hu-
midity is high. This is normal. Wipe
the condensation using a soft cloth.

Rated electrical specifications

Supply voltage
Power consumption
Frequency
Refrigerant/Amount
Possible solution
• Make sure the freezer is plugged to power.
• The light bulb is damaged.
• The door is stuck by food packages.
• Too much food packages inside the freezer.
• Freezer is tilted.
• Food packages are not level.
• Freezer is not leveled.
• Airflow sound. Refrigerant circulat-
ing through the refrigerant lines will
produce gurgling and grunts. This is
normal and will not affect the cool-
ing performance of the appliance.
• Buzzing sound. This will be gener-
ated by the compressor running,
specially when starting and turning
off.
• Clatter. The solenoid valve or elec-
tric switch valve will clatter which is
normal and does not affect opera-
tion of the freezer.
FDM200HSYDBB1 FDM250HSYDBB1 FDM350HSYDBB1
220-240 V ~
120 W
50 Hz
R600a/42 g
23
C
HEST
220-240 V ~
145 W
50 Hz
R600a/48 g
F
REEZER
220-240 V ~
100 W
50 Hz
R600a/57 g