gazebo L-GZ702PST Instrucciones De Montaje, Manual Del Usuario página 6

Fig.3:
Put assembled Long Mosquito Netting Runner 1&2 (E1&E2) on Pole (J), then use Bolt (CC) and Flat
Washer (BB) to insert Bottom Connecting Oblique Beam (D) and lock on Pole (J). Don't tighten the bolts
at this step.
Fig.4:
Insert Short Mosquito Netting Runner 1&2 (F1&F2) into the gap between Pole (J) and Bottom
Connecting Oblique Beam (D), then use Bolt (CC) and Flat Washer (BB) to lock them tightly. Tighten the
other side's bolts also at this step.
Fig.5:
Connect Pole Support Slice (I) to Post (J), Long Mosquito Netting Runner 1&2 (E1&E2), Short Mosquito
Netting Runner 1&2 (F1&F2) by Bolt (AA) and Flat Washer (BB).
Fig.6:
Connect Corner Support (H) to Long Mosquito Netting Runner 1&2 (E1&E2) and Short Mosquito Netting
Runner 1&2 (F1&F2) by Bolt (AA) and Flat Washer (BB).
6