gazebo L-GZ702PST Instrucciones De Montaje, Manual Del Usuario página 7

Fig.7:
Insert Top Connecting Middle Beam (A2) to Top Connector (A1) by Bolt (AA) and Flat Washer (BB).
Then screw Hook (L) onto Connecting Middle Beam (A2).
Fig.8:
Insert Oblique Beam (B) into Top Connector (A1).
Fig.9:
Insert bottom of Oblique Beam (B) into Bottom Connecting Oblique Beam (D).
Fig.10:
Insert Middle Beam (C) into Top Connector (A1).
Fig.11:
Connect Middle Beam (C) to Long Mosquito Netting Runner 1&2 (E1&E2) by Bolt (AA) and Flat
Washer (BB).
Fig.12:
Assembly Mosquito Netting Hook (JJ) to the gutter of the Mosquito Netting Runner.
(Note: Long Mosquito Netting Runner 1&2 (E1&E2), each runner needs 8pcs of hooks. Short
Mosquito Netting Runner 1&2 (F1&F2), each runner needs 6pcs of hooks. After assemble the hooks,
use Bolt (EE) and Flat Washer (BB) to lock Baffle (P) to Long Mosquito Netting Runner 1&2 (E1&E2).
7