Descargar Imprimir esta página

Panasonic GF Serie Instrucciones De Operación página 9

Publicidad

Idiomas disponibles

Idiomas disponibles

FEATURE OPERATION
FEATURE OPERATION
FEATURE OPERATION
FEATURE OPERATION
TO SELECT FAN SPEED
• There are 5 fan speeds, as well as
automatic*.
* For automatic fan speed, the speed
of the indoor fan is automatically
adjusted according to the operation.
TO ADJUST AIRFLOW DIRECTION
• Keeps the room ventilated.
• AIR SWING - AUTO
AUTO
• The vertical airfl ow louver swings up and
down automatically.
• In heat mode, the air blows horizontally for
AIR SWING
a while, then starts to blow downwards.
• AIR SWING - MANUAL
• The airfl ow direction can be adjusted as
desired by using remote control.
AIR SWING
• Do not adjust the vertical airfl ow direction
louvers by hand.
MANUAL
• Horizontal airfl ow direction louver is
manually adjustable.
• Both upper and lower horizontal
airfl ow direction louvers are manually
adjustable.
• The air is discharge evenly through
4 output vents.
• Air Swing is not applicable for DD-series
indoor unit.
TO ENJOY QUIET ENVIRONMENT
QUIET
• This setting provides a quiet environment by
reducing the airfl ow noise.
TO ACHIEVE TEMPERATURE QUICKLY
• This setting enables the desired
temperature to be reached quickly.
QUIET
and
operations are available in all modes and
could be cancelled by pressing the respective button again.
QUIET
and
operations could not be activated at the
same time.
TIMER SETTING
TIMER SETTING
TIMER SETTING
TIMER SETTING
TO SET THE TIMER
• When you want the air conditioner to turn ON or OFF
automatically at a preset time.
ON
OFF
Select ON
or OFF
timer.
To cancel ON or OFF timer, press
ON
• When ON Timer is set, the unit may start earlier (up
to 35 minutes) before the actual set time in order to
achieve the temperature you preferred.
• The timers repeat daily once set.
• If there is a power failure, you can restore the
previous setting (once power is resumed) by pressing
SET
the
• If the timer is cancelled, press
previous setting.
(DT-Series)
● The timer is based on the time set in the remote
control.
● You can set your preferred time for ON and OFF
timers.
(GF-Series)
Hints
■ Temperature setting of 1°C higher in cool mode or
(DB-Series)
2°C lower in heat mode than the desired temperature
performs a 10% power saving.
■ To reduce power consumption during cool mode, close
the curtains to prevent the sunlight and heat from
coming in.
■ To set either 12-hour (am/pm) or 24-hour time
indication, press and hold
seconds.
● To turn off the air conditioner, press
1
2
Set the
desired
the setting.
time.
or
, then press
OFF
button.
SET
for approximately 10
CLOCK
SET
Confi rm
.
CANCEL
to restore the
OFF/ON
.
9

Publicidad

loading