Descargar Imprimir esta página

Connecting And Using A Tethered Scanner - Symbol 3100 Serie Guía De Referencia Rápida

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Connecting and Using a Tethered Scanner

To attach a wand or laser scanner to the Series 3100 terminal:
1. Turn the system off.
2. Remove the plastic cap in the top of the terminal.
3. Plug the scanner into the top of the terminal as shown
below.
4.
Aim the scanner at the bar code and press the trigger.
Note:
Depending on your application, you may need to turn on
the terminal before using the scanners.
5. If using a wand scanner, lightly touch the scanner tip to
the white space at the left side of the bar code and move it
to the right.
19

Publicidad

loading