eTIGER ES-CAM3A Manual Del Usuario página 11

Installation
To mount the ES-CAM3A on a wall, remove the base of the camera.
Fasten the base to the wall with the screws and anchors included in the box.
Reattach the camera to the base and screw them together (see drawing below).
Reset
Press the button at the back of the camera for more than 12 seconds until the
front LED indicator blinks orange to restore factory settings.
If you notice connection issues, try restarting the ES-CAM3A by pressing the
button at the back of the camera for 5 seconds.
11