Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

TROuBLEShOOTING

Symptom
1. Motor does not run
2. Coins are not sorting into tubes.

SPECIfICATIONS

MODEL
DIMENSIONS (L) x (D) x (H)
SORTING SPEED
MOTOR TYPE
POWER CONSUMPTION
POWER SUPPLY
WEIGHT
1. Check that the power cord is plugged in.
2. Check that the power switch is turned on.
3. Press the RUN/STOP button again.
4. Check that the tube trays are in the correct position: pushed all the way
in or pulled all the way out.
Foreign objects and bent, damaged, or sticky coins may cause the machine
to jam:
1. This machine is designed to resolve jams automatically. Wait about 15
seconds as the agitation screw and the running vessel rotate back and
forth to release the jam.
2. Tap machine gently on the side to loosen jam.
3. If the machine is still not sorting, push the RUN/STOP button.
4. Loosen the Hopper Lid Screw with a coin.
5. Lift the Hopper Lid exposing the Running Vessel.
6. Retrieve jammed item and replace Hopper Lid.
7. Screw Hopper Lid and push RUN/STOP to start sorting again.
7.1" x 11.5" x 10"
180mm x 292 mm x 254mm
Up to 200 coins / min
AC synchronous motor
4 W
120Vac / 60Hz
4.1 lbs
7
QS - 1AC
Solutions
QS-1AC

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido